Most of what a car needs is written on one page of the owner’s manual. Here is what that schedule covers, what you can check for free, and how to sort a shop’s recommendations into what matters and what can wait.
Car maintenance sounds complicated until you split it into two lists: the services the manufacturer asks for on a schedule, and the checks you can do in your own driveway with no tools. This guide covers both, and shows how to sort a shop’s recommendations into necessary, useful and skippable.
Why the Owner’s Manual Schedule Comes First
The owner’s manual is the booklet, or downloadable file, that came with your vehicle. Inside is a maintenance schedule listing services such as oil changes and tire rotations at certain mileage or time intervals. It is the manufacturer’s own statement of what the vehicle needs, and the yardstick for every other recommendation you will hear.
It also protects your warranty. A warranty is an agreement, included with a new vehicle, to repair certain covered problems during a set period of ownership, often measured in both time and miles, with coverage ending when either limit is reached. The Federal Trade Commission (FTC) notes that you do not have to use the dealer for routine maintenance, and that a dealer cannot refuse coverage because someone else did the work. Independent shops, home oil changes and aftermarket parts, meaning parts not made by the vehicle’s manufacturer, are all allowed. One limit: the manufacturer can deny coverage for a part if it proves a badly installed or defective aftermarket part caused the damage.
One more term. An auto service contract, sometimes called an extended warranty, is an optional contract sold separately by a manufacturer, dealer or independent company. It is not a warranty under federal law. Prices and coverage vary widely, some contracts cover maintenance tasks such as scheduled oil changes, and they typically exclude accident damage and normal wear and tear.
The Checks You Can Do Yourself for Free
Start with tires, the only part of the car that touches the road. Tire pressure is the amount of air inside a tire, measured cold, meaning the car has been parked for three hours or more since it was last driven. The right number is on a sticker inside the driver’s door jamb; the manual lists it too. The figure molded into the tire’s sidewall is different: that is the most air the tire can ever hold, not the level your vehicle needs. All tires lose air over time even without a puncture, and running low is the most common cause of tire failure, so check all four with a gauge about once a month, along with the spare.
Tread is the rubber that grips the pavement. The quick check is the penny test: place a penny into a main tread groove with Lincoln’s head pointing down. If his head is fully visible, the tread has worn down to 2/32 of an inch or less, which is when replacement is due. Sample more than one groove, since uneven wear often hides near the edges. Wear that varies across the surface points to a rotation or a wheel alignment. Age counts as well: some manufacturers advise new tires once a set is 6 to 10 years old, even if plenty of tread remains.
A monthly walk-around covers the rest:
| Check | How to do it | What to look for |
|---|---|---|
| Lights | Have a helper work the pedals while you walk around | Bulbs that are out or dim |
| Wipers | Run them with washer fluid | Streaking, chattering or cracked blades |
| Fluids | Check oil, coolant and washer fluid using the manual’s diagrams | Levels below the markings or puddles where you park |
| Battery | Look at the terminals and listen at startup | Corrosion on the posts or slow cranking |
Money saver: A dashboard tire-pressure light is a backup, not a substitute. Keep a small gauge in the glovebox and check the tires directly rather than waiting for the light.
Check for recalls too. NHTSA, the National Highway Traffic Safety Administration, offers a free lookup tool: enter your vehicle identification number (VIN) or license plate to see whether an open safety recall exists. Recall repairs cost nothing.
Common Maintenance Items and What They Usually Cost
The schedule typically moves through oil and filter changes, tire rotations, engine and cabin air filters, brake inspections, belt checks and, less often, batteries and coolant. Each item does a specific job: oil lubricates the engine, rotation evens out tire wear, filters keep dirt out, and brake pads provide the friction that stops the car.
Prices vary by vehicle, region and shop, so treat any single quote as one data point, not the market rate. The useful habit is asking for an itemized written estimate, a parts and labor breakdown for each service, before you agree to work. Comparing two or three shops on the same list gives you a range. If the vehicle is under warranty or you bought a service contract, check what it covers before paying out of pocket, since some contracts include oil changes.
How to Read a Repair Shop’s Recommendation List
When a shop hands back a list of suggested services, sort each item into one of three buckets. The first is anything already due on the manual’s schedule. The second is anything that addresses a symptom you noticed or a problem the shop can show you, such as brake pads worn thin. The third is everything else, and that is where questions are fair.
The FTC’s auto repair advice comes down to being prepared: know how your vehicle works and recognize the common problems. For each item, ask what happens if you wait, and ask for the reason in writing on the estimate. A shop confident in its advice will explain it. Politely declining those extras is a normal part of owning a car.
Skipping or Delaying Maintenance: The Trade-Offs
Every deferred service is a trade, and it cuts both ways. Skipping a tire rotation saves a little now but encourages uneven wear, which can force earlier tire replacement. Driving on underinflated tires raises the chance of a failure, and worn tread affects handling, braking and ride. On the other side, paying for services long before the schedule calls for them mostly means spending sooner than the manufacturer asks. The balanced approach is to follow the schedule, respond to genuine symptoms, and skip the extras that belong to neither.
Keeping Records So You Don’t Pay Twice
Save receipts for the scheduled work and repairs, whether a shop did them or you did: oil changes and tire rotations, belts, brake pads, inspections. The FTC notes that the company behind your warranty may ask for proof that required maintenance was done, so a folder of receipts doubles as exactly that. Records also prevent duplicate work: if a shop recommends an air filter, your file shows whether one was already replaced. When you eventually sell, a documented history answers the first question most buyers ask.
When a Second Opinion Is Worth Asking For
A second opinion earns its fee when the list is long, the total is high, or the problem is one you cannot see for yourself. Paying an independent mechanic to diagnose a symptom or review a recommendation is a normal step, the same logic as hiring an inspector before buying a used car. Ask for the diagnosis in writing and for the worn parts as evidence. If both shops agree, you can go back with confidence. If they differ, the itemized notes from each will show where they part ways.
For the bigger picture of yearly vehicle costs, see The Real Cost of Keeping a Car on the Road Each Year, and for savings behind the wheel, see Cut Fuel Costs With Everyday Driving Habits. Then start small: find the sticker on your driver’s door jamb and check the pressure in all four tires plus the spare.
Quick wins
- The owner’s manual’s maintenance schedule is the manufacturer’s own list of what your vehicle needs, and it is the standard every shop recommendation should be measured against.
- You do not have to use the dealer for routine maintenance to keep a warranty in effect, and the FTC says a dealer cannot refuse coverage just because someone else did the work.
- Check tire pressure monthly while the tires are cold, using the sticker inside the driver’s door jamb rather than the sidewall’s maximum figure.
- The penny test: if Lincoln’s whole head is visible in a tread groove, the tread has reached 2/32 of an inch and new tires are needed.
- Sort a shop’s recommendation list into schedule items, symptom fixes and everything else, and keep receipts, since the company behind your warranty may ask to see them.
You might be wondering
Do I have to go to the dealer to keep my warranty valid?
No. The FTC notes you can use an independent shop or do the work yourself, and a dealer is not allowed to refuse warranty coverage because someone else did the maintenance.
How do I check my tire tread without special tools?
Place a penny in a tread groove with Lincoln’s head pointing down. If his head is fully visible, the tread has reached 2/32 of an inch or less, which means new tires.
Is an extended warranty the same thing as a warranty?
No. An auto service contract, often called an extended warranty, is an optional contract sold separately, and it is not a warranty under federal law. Coverage and price vary widely between contracts.
How do I find out whether my car has an open recall?
Use NHTSA’s free lookup tool and enter your VIN or license plate number. Recall repairs are performed free of charge.
These tips are general information. Prices, plans and programs vary by provider and location, so check the details with your provider before you switch or sign up.


